Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

Features

  • USB-IF Hi-Speed certified to the Universal Serial Bus Specification Rev 2.0
  • Interface compliant with the ULPI Specification revision 1.1 in 8-bit mode
  • Industry standard UTMI+ Low Pin Interface (ULPI) Converts 54 UTMI+ signals into a standard 12 pin Link controller interface
  • 54.7mA Unconfigured Current (typical) - ideal for bus powered applications
  • 83uA suspend current (typical) - ideal for battery powered applications
  • Latch-Up performance exceeds 150 mA per EIA/JESD 78, Class II
  • ESD protection levels of ±8kV HBM without external protection devices
  • Integrated protection to withstand IEC61000-4-2 ESD tests (±8kV contact and ±15kV air) per 3rd party test facility
  • Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3)
  • Supports HS SOF and LS keep-alive pulse
  • Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 1.0a specification
  • Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
  • Allows host to turn VBUS off to conserve battery power in OTG applications
  • Supports OTG monitoring of VBUS levels with internal comparators. Includes support for an external VBUS or fault monitor.
  • Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI wrapper
  • Integrated Pull-up resistor on STP for interface protection allows a reliable Link/PHY start-up with slow Links (software configured for low power)
  • Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
  • Internal short circuit protection of ID, DP and DM lines to VBUS or ground
  • Integrated 24MHz Crystal Oscillator supports either crystal operation or 24MHz external clock input
  • Internal PLL for 480MHz Hi-Speed USB operation
  • Industrial Operating Temperature -40°C to +85°C
  • 32 pin, QFN lead-free RoHS Compliant package (5 x 5 x 0.90 mm height)

Applications

The USB3300 is the ideal companion to any ASIC, SoC or FPGA solution designed with a ULPI Hi-Speed USB host, peripheral or OTG core.

The USB3300 is well suited for:

  • Cell Phones
  • PDAs
  • MP3 Players
  • Scanners
  • External Hard Drives
  • Digital Still and Video Cameras
  • Portable Media Players
  • Printers

Although the information in this document has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to product descriptions and specifications at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order. Products may contain design defects or errors known as anomalies which may cause a product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC and the SMSC logo are registered trademarks of Standard Microsystems Corporation ("SMSC"). Other names mentioned may be trademarks of their respective holders. All claims made herein speak as of the date of this material. The company does not undertake to update such statements.

Buy Now

Digi-Key:
www.digikey.com

Mouser Electronics:
www.mouser.com

Parametric Search
Last Change: 22nd of February 2013