Fan Control Device with Hardware Monitoring and Acoustic Noise Reduction Features

Features

  • 3.3 Volt Operation (5 Volt Tolerant Input Buffers)
  • SMBus 2.0 Compliant Interface (Fixed, Not Discoverable) with Three Slave Address Options
  • Fan Control
    • PWM (Pulse Width Modulation) Outputs (3)
    • Fan Tachometer Inputs (4)
    • Individual Status and Enable Bits Per Tach Input
    • Programmable Automatic Fan Control Based on Temperature
    • Fan Ramp Rate Control for Acoustic Noise Reduction
  • Temperature Monitor
    • Monitoring of Two Remote Thermal Diodes (+/- 3 Degrees C Accuracy)
    • Internal Ambient Temperature Measurement
    • Limit Comparison of All Monitored Values
    • Individual Status and Enable Bits Per Thermal Input
    • Interrupt Pin for Out-of-Limit Temperature Indication
    • Configurable Offset for Internal or External Temperature Channels
    • Supports Four Programmable Temperature Averaging Modes
    • Two Monitoring Modes: Continuous or Cycle (Power Saving Mode)
    • Offers Two Low Power Modes When Monitoring Is Off: Sleep and Shutdown
  • Voltage Monitor
    • Monitor Power Supplies (+2.5V, +5V, +12V, Vccp, and VCC)
    • Individual Status and Enable Bits Per Voltage Input
    • Limit Comparison of All Monitored Values
    • Interrupt Pin for Out-of-Limit Voltage Indication
    • Supports Four Programmable Voltage Averaging Modes
    • Two Monitoring Modes: Continuous or Cycle (Power Saving Mode)
    • Offers Two Low Power Modes When Monitoring Is Off: Sleep and Shutdown
  • 5 VID (Voltage Identification Inputs)
  • XNOR Tree Test Mode
  • 24-pin, SSOP Lead-Free RoHS Compliant package

Although the information in this document has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to product descriptions and specifications at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order. Products may contain design defects or errors known as anomalies which may cause a product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC and the SMSC logo are registered trademarks of Standard Microsystems Corporation ("SMSC"). Other names mentioned may be trademarks of their respective holders. All claims made herein speak as of the date of this material. The company does not undertake to update such statements.

Related Links
Parametric Search