USB 2.0 PHY Evaluation Board

Introduction

The EVB-USB3280 is a card designed to plug into the user's test system using a standard interface. The board includes the USB3280 packaged silicon and all associated external components.

Product Description

The EVB-USB3280 is designed as a Daughter Card with a standard test interface. The test interface is documented in the USB2.0 Transceiver and Macrocell Tester (T&MT) interface specification.

Features

  • USB-IF "Hi-Speed" Certified
  • Interface Compliant with the UTMI Specification (60MHz, 8-bit bidirectional interface)
  • Supports 480 Mbps High Speed (HS) and 12 Mbps Full Speed (FS) Serial Data Transmission Rates
  • Interfaces Through 100-pin Connector as Defined in the T&MT Interface Specification
  • Powered by 3.3V from the 100-Pin Connector
  • Supports Tests Modes Per USB 2.0 Specification, Section 7.1.20
  • Standard USB Type 'B' Connector
  • Includes Probe Points on All Data and Control Signals for Troubleshooting
  • Includes 24MHz Crystal for PHY Reference; Supplies Clock to the 100-Pin Connector

Applications

The EVB-USB3280 simplifies the process of testing a Universal Serial Bus (USB) 2.0 system.

  • Verify SIE to PHY interface
  • Support testing of FPGA implementations of SIE
  • Assist interoperability test of various SIEs
  • Verify UTMI compliance

Specifications

EVB-USB3280.jpg

Although the information in this document has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to product descriptions and specifications at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order. Products may contain design defects or errors known as anomalies which may cause a product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC and the SMSC logo are registered trademarks of Standard Microsystems Corporation ("SMSC"). Other names mentioned may be trademarks of their respective holders. All claims made herein speak as of the date of this material. The company does not undertake to update such statements.