SuperSpeed USB 3.0 Hub Controllers with Integrated Charging

Highlights

  • Two, three, or four downstream USB 3.0 ports (which also support USB 2.0)
  • Three additional USB 2.0 ports for non-removable devices (USB5537B only)
  • Designed for low-power operation and low thermal dissipation
  • On-chip 8051 µC manages GPIOs, VBUS, and other hub signals
  • Configuration via on-chip programmable ROM, SPI ROM or SMBus
  • Manufacturing line and field update capabilities
  • Power management capability on GPIO/LED pins
  • One-Time Programmable (OTP) ROM (8 kbit), including on-chip charge pump
  • IETF RFC 4122 compliant 128-bit UUID
  • Compatible with Microsoft® Windows® 8 and other major OS’s
  • SMSC’s TrueSpeed LEDs (configuration dependent)
    • Multi-color LED scheme shows port capability and speed
  • Embedded 8051 microcontroller for hub configuration
  • 64 or 72-pin, low-cost QFN packages enable 2-layer PCB design
  • Industrial temperature range (-40°C to 85°C) options available

Target Applications

  • Expansion Hubs
  • Docking Stations
  • LCD Monitors
  • HDTVs
  • „AV Equipment
  • „Automotive Head End Units (HEUs)
  • „Industrial Products

Although the information in this document has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to product descriptions and specifications at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order. Products may contain design defects or errors known as anomalies which may cause a product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC and the SMSC logo are registered trademarks of Standard Microsystems Corporation ("SMSC"). Other names mentioned may be trademarks of their respective holders. All claims made herein speak as of the date of this material. The company does not undertake to update such statements.

Last Change: 26th of February 2013