EMC6W201 General Description
	Data Brief, Application Notes, Drivers and Design Tools

Features

	3.3 Volt Operation (5 Volt Tolerant Input Buffers)
	SMBus 2.0 Compliant Interface (Fixed, Not Discoverable) with Three Slave Address Options SMBus Address Change Pin SMBus Address Enable Pin
	Auto-Fan Control with ProcHot Features PWM (Pulse Width Modulation) Outputs (3) Low Frequency and High Frequency PWM Options (15kHz up to 30kHz) Fan Tachometer or Lock Rotor Inputs (4) Programmable Automatic Fan Control Based on Temperature Acoustic Enhancement Mode ProcHot Pins Modulate Tmin Fan RPM Is a Function of Up to Three Temperatures and ProcHot Signals Piecewise Linear Fan Control Algorithm Option
	Temperature Monitor Monitoring of Up to Five Remote Thermal Diodes (+/- 3 Deg C Accuracy) Internal Ambient Temperature Measurement Limit Comparison of All Monitored Values Interrupt Pin for Out-of-Limit Temperature Indication Configurable Offset for Internal or External Temperature Channels
	Voltage Monitor Monitor Power Supplies (+1.5V, +2.5V, +5V, VCC and Two 1.5V VCCP) Limit Comparison of All Monitored Values Interrupt Pin for Out-of-Limit Voltage Indication
	ProcHot Input/Bi-Directional Pins (2) Selectable Pins Dedicated As Input or Input/Output Separate ProcHot Output Pin (FORCED_PR#)
	Power Good Output
	SMBus Alert Interrupt Output
	Register Characteristics Individual Enables/Disables for Each Input Two ISRs for Each Alert
	XOR Tree Test Mode
	Mechanical Package: 36-pin QFN; lead-free RoHS Compliant

General Description

The EMC6W201 is an environmental monitoring device with automatic fan control capability and enhanced system acoustics for noise suppression. This ACPI compliant device provides hardware monitoring for up to six voltages (including its own VCC) and five external thermal sensors, measures the speed of up to five fans, and controls the speed of multiple DC fans using three Pulse Width Modulator (PWM) outputs. Note that it is possible to control more than three fans by connecting two fans to one PWM output. The EMC6W201 will be available in a 36-pin QFN package.

The EMC6W201 includes support for monitoring six thermal sensors: five external and one internal. The external temperatures are measured via thermal diode inputs capable of monitoring remote devices. In addition, it is equipped with an ambient temperature sensor for measuring the internal temperature.

The EMC6W201 hardware monitor provides analog inputs for monitoring external voltages of +1.5V, +2.5V, +5V, and two Vccp voltages. This device has the capability to monitor its own internal VCC power supply, which may be connected to either main power (VCC) or the suspend power well (VTR). External components are not required for voltage scaling or similar treatment.

Pulse Width Modulators (PWM) will control the speed of the fans by varying the output duty cycle of the PWM. The Ramp Rate Control feature controls the rate of change of the PWM output, thereby reducing system noise created by changing the fan speed. The speed of each fan is monitored by a Fan Tachometer input. The measured values are compared to values stored in Limit Registers to detect if a fan has stalled or seized.

Fan speed may be under host software control or automatic. In host control mode, the host software continuously monitors temperature and fan speed registers, makes decisions as to desired fan speed and sets each PWM to drive the required fan speed. The PWM frequency is adjustable up to 30kHz. The EMC6W201 device offers an interrupt output signal (INT#), which may be used to interrupt the host on out-of-limit temperature or voltage condition enabling an ACPI response as opposed to the host software continuously monitoring status.

In auto "zone" mode, the EMC6W201 logic continuously monitors the temperature and fan speeds and adjusts speeds without intervention from the host CPU. Fan speed is adjusted according to an algorithm using the temperature measured in the selected zone, the high and low limits set by the user, and the current fan speed. The part can automatically adjust its operation based on its environment for improved acoustic behavior.

EMC6W201 Data Brief, Application Notes,
Drivers and Design Tools

Description	File Name	File Size	Date
EMC6W201 Data Brief	6w201db.pdf	400K	3/1/07
Evaluation Board
EVB-EMC6W201
Application Notes
Application Note 10-14: Using Temperature Sensing Diodes with EMC Devices - Remote Sensors	an1014.pdf	162K	7/18/06
Application Note 12-14: Remote Thermal Sensing Diode Selection Guide	an1214.pdf	216K	9/9/05
Other Information
Using the Adobe® Acrobat® Reader	aacrobat.html