 EVB-USB3300
Hi-Speed USB PHY Evaluation Board
 Introduction
The EVB-USB3300 is a card designed to plug into the user's test system using a standard interface. The board includes the USB3300 packaged silicon and all associated external components.
Product Description
The EVB-USB3300 is a physical layer daughter card that attaches to a USB link layer to create a USB Host, Device, or On-the-Go (OTG) system. The board edge connector meets the UTMI + Low Pin Interface (ULPI) specification requirements for the T&MT connector.
Features
 |
USB-IF "Hi-Speed" Certified |
|
Interface Compliant with the ULPI Specification |
|
Supports 480 Mbps High Speed (HS) and 12 Mbps Full Speed (FS) and 1.5 Mbps Low Speed (LS) Serial Data Transmission Rates |
|
Interfaces Through 100-pin Connector as Defined
in the ULPI Specification |
|
Powered by 3.3V from the 100-Pin Connector |
|
Supports the 8-Bit Data Bus UTMI + Low Pin Interface |
|
Supports Tests Modes Per USB2.0 Specification,
Section 7.1.20 |
|
Standard Mini-AB USB Connector |
|
Includes Probe Points on All Data and Control
Signals for Troubleshooting |
|
Includes 24MHz Crystal for PHY Reference;
Supplies Clock to the 100-Pin Connector |
|
Supports Application of External VBUS Power for Host and On-The-Go (OTG) Applications |
|
Includes a 500mA Fault Protected 5V Vbus Switch |
Applications
The EVB-USB3300 simplifies the process of testing a Universal
Serial Bus (USB) 2.0 system. The ULPI interface supports operation as a device, host, or OTG device.
|
Verify Link to PHY interface |
|
Support testing of FPGA implementations of
Link |
|
Assist interoperability test of various Links |
|
Verify ULPI compliance |
|
Verify performance of a UTMI to ULPI wrapper added to a Link |
Specifications
EVB-USB3300 Documentation and Support Files
|
