 |
5 Volt Operation |
|
Floppy Disk Available on Parallel Port Pins |
|
2.88MB Super I/O Floppy Disk Controller
 |
Licensed CMOS 765B Floppy Disk Controller |
|
Software and Register Compatible
to the 82077AA Using SMSC's Proprietary Floppy
Disk Controller Core |
|
Supports Vertical Recording Format |
|
100% IBM Compatibility |
|
Detects All Overrun/Underrun Conditions |
|
48 mA Drivers and Schmitt Trigger
Inputs |
|
DMA Enable Logic |
|
Data Rate and Drive Control Registers |
|
Swap Drives A and B |
|
Non-Burst Mode DMA Option |
|
FDC Primary/Secondary Address Selection |
|
16 Byte Data FIFO |
|
Low Power CMOS 0.8µ Design |
|
|
Enhanced Digital Data Separator
|
Low Cost Implementation - 24 MHz
Crystal |
|
No Filter Components Required |
|
Ease of Test and Use, Lower System
Cost, and Reduced Board Area |
|
1 Mbps, 500 Kbps, 300 Kbps, 250 Kbps
Data Rates |
|
Supports Floppy Disk and Tape Drives |
|
Programmable Precompensation Modes |
|
|
Serial Ports
|
Two High Speed NS16C550 Compatible
UARTs with Send/Receive 16 Byte FIFOs |
|
MIDI Compatible |
|
Programmable Baud Rate Generator |
|
Modem Control Circuitry |
|
|
Multi-Mode™ Parallel Port
|
Standard Mode:
|
IBM PC/XT, PC/AT, PS/2 Compatible
Bidirectional Parallel Port |
|
|
Enhanced Mode:
|
Enhanced Parallel Port (EPP)
Compatible - EPP 1.7 and EPP 1.9 Compliant |
|
|
High Speed Mode:
|
Microsoft and Hewlett Packard
Extended Capabilities Port (ECP) Compliant |
|
|
Incorporates ChiProtect™ Circuitry
for Protection Against Damage Due to Printer Power-On |
|
Provides Backdrive Current Protection |
|
24 mA Output Drivers |
|
Two Parallel Port Interrupt Pins |
|
|
ISA Host Interface |
|
IDE Interface
|
On-Chip Decode and Select Logic Compatible
with IBM PC/XT and PC/AT Embedded Hard Disk Drives |
|
IDE Primary/Secondary Address Selection |
|
|
Supports Four Floppy Drives Directly (Standard
and Enhanced Modes) |
|
General Purpose 11 Bit Address Decoder |
|
100 Pin QFP Package |
| Description |
File Name |
File Size |
Date |
 |
| FDC37C665GT Data Sheet |
37c665gt.pdf |
425K |
2/16/07 |
| Evaluation Boards |
EVB-SIO665GT |
|
|
|
| Reference Design
Files |
|
|
|
| FDC37C665/666 Configuration Program |
665.exe |
43K |
3/26/93 |
| ECP Production Test |
ecp300.zip |
57K |
4/29/99 |
| Reference Design |
sio66x.pdf |
100K |
10/20/98 |
|
| Application Notes |
|
|
|
| Application Note 4-10: SMSC's Family of Super
I/O Solutions |
an410.pdf |
111K |
|
| Application Note 4-11: FDC37C6xx Super I/O
Universal Design-In Application Note |
an411.pdf |
118K |
|
| Application Note 4-12: FDC37C6xx Three Mode
Drive Support |
an412.pdf |
113K |
|
| Application Note 4-14: FDC37C6xx DMA IDE Support |
an414.pdf |
105K |
|
| Application Note 5-5: FDC37C6xx DMA IDE Support |
an55.pdf |
114K |
|
| Application Note 5-8: Windows '95 Software
Configurable DMA/IRQ Selection with FDC37C665GT/LV/IR 11
Bit Address Decoder |
an58.pdf |
116K |
|
| Application Note 5-9: Address Relocation of
Super I/O Configuration Registers with the FDC37C665GT/LV/IR |
an59.pdf |
128K |
|
| Application Note 5-10: Printer Port Issues
- Printer Chatter and Back Drive |
an510.pdf |
126K |
|
| Application Note 5-15: Modifying SMSC's Super
I/O Rev. B Evaluation Boards for the FDC37C665IR and TEMIC
IrDA Interface |
an515.pdf |
143K |
|
| Application Note 6-18: SMSC Super and Ultra
I/O Design Advantages and Cost Savings (Replacement for
AN 5-3) |
an618.pdf |
271K |
|
| Application Note 7-1: SMSC Super I/O and Ultra
I/O Design Tips/Resistor Considerations |
an71.pdf |
134K |
|
| Application Note 7-10: Consumer IR Primer/Manual/Software
Outline |
an710.pdf |
197K |
|
|
| Anomaly |
Contact your local SMSC representative |
| Object Code |
Unlimited royalty-free distribution
rights when offered with SMSC controller |
| Source Code |
Contact your local SMSC representative |
| Using the Adobe® Acrobat® Reader |
aacrobat.html |
|
|
