 |
Supports Standard 5 Volt Operation |
 |
Intelligent Auto Power Management |
 |
16 Bit Address Qualification (Optional) |
 |
ACPI 1.0 Compliant |
 |
PC98/99 Compliant |
 |
2.88MB Super I/O Floppy Disk Controller
 |
Licensed CMOS 765B Floppy Disk Controller |
 |
Software and Register Compatible
to the 82077AA |
 |
Supports Two Floppy Drives Directly |
 |
Supports Vertical Recording Format |
 |
16 Byte Data FIFO |
 |
100% IBM Compatibility |
 |
Detects All Overrun/Underrun Conditions |
 |
Sophisticated Power Control Circuitry
(PCC) Including Multiple Powerdown Modes for Reduced
Power Consumption |
 |
DMA Enable Logic |
 |
Data Rate and Drive Control Registers |
 |
Swap Drives A & B |
 |
Non-Burst Mode DMA Option |
 |
48 Base I/O Address, Eight IRQ and
Three DMA Options |
 |
Low Power CMOS 0.8µ Design |
|
 |
Floppy Disk Available on Parallel Port Pins |
 |
Enhanced Digital Data Separator
 |
2 Mbps, 1 Mbps, 500 Kbps, 300 Kbps,
250 Kbps Data Rates |
 |
Supports Floppy Disk Drives and Tape
Drives |
 |
Programmable Precompensation Modes |
|
 |
Serial Ports
 |
Two High-Speed NS16C550-Compatible
UARTs with Send/Receive 16 Byte FIFOs |
 |
Supports 230K and 460K Baud |
 |
Programmable Baud Rate Generator |
 |
Modem Control Circuitry |
 |
Infrared - IrDA (HPSIR) and Amplitude
Shift Keyed IR (ASKIR) |
 |
Alternate IR Pins (Optional) |
 |
96 Base I/O Adddress and Eight IRQ
Options |
|
 |
Multi-Mode Parallel Port
 |
Standard Mode:
 |
IBM PC/XT, PC/AT, and PS/2
Compatible Bidirectional Parallel Port |
|
 |
Enhanced Mode:
 |
Enhanced Parallel Port (EPP)
Compatible - EPP 1.7 and EPP 1.9 (IEEE
1284 Compliant) |
|
 |
High Speed Mode:
 |
Extended Capabilities Port
(ECP) Compatible (IEEE 1284 Compliant) |
|
 |
Incorporates ChiProtect Circuitry |
 |
192 Base I/O Address, Eight IRQ and
Three DMA Options |
|
 |
IDE Interface (Optional)
 |
On-Chip Decode and Select Logic Compatible
with IBM PC/XT and PC/AT EmbeddedHard Disk Drives |
 |
48 Base I/O Address and Eight IRQ
Options |
|
 |
Game Port Select Logic
 |
48 Base I/O Addresses |
|
 |
48 Base I/O Addresses |
 |
General Purpose Address Decoder
 |
16 Byte Block Decode |
 |
48 Base I/O Address Option |
|
 |
100 Pin QFP and TQFP Packages; Lead-Free RoHS Compliant Packages also available |
| Description |
File Name |
File Size |
Date |
 |
| FDC37C669 Data Sheet |
37c669.pdf |
619K |
6/29/07 |
| Evaluation Boards |
EVB-SIO669 |
|
|
 |
| Reference Design
Files |
|
|
|
| ECP Production Test Utility |
ecp300.zip |
57K |
4/29/99 |
| FDC37N769 Configuration Register Editor Utility |
cre52.exe |
31K |
5/26/00 |
| SMSC IrDA NDIS 5.0 Driver for Windows 98,
Windows 98SE, Windows Me, and Windows 2000 |
irndisk.zip |
94K |
9/14/00 |
| FDC37C669 Reference Design Schematic, ORCAD |
6060-ss-.dsn |
247K |
12/11/00 |
| FDC37C669 Reference Design Schematic, PDF |
6060-ss.pdf |
89K |
6/12/96 |
| FDC37C669 Evaluation Board Test Procedure |
669test.doc |
110k |
5/12/97 |
| Bill of Materials |
67x.bom |
22K |
12/6/96 |
 |
| Application Notes |
|
|
|
| Application Note 4-14: FDC37C6xx DMA IDE Support |
an414.pdf |
105K |
|
| Application Note 5-5: FDC37C6xx DMA IDE Support |
an55.pdf |
114K |
|
| Application Note 6-0: Dual Footprint for the
FDC37C669 and FDC37C669FR |
an60.pdf |
136K |
|
| Application Note 6-18: SMSC Super and Ultra
I/O Design Advantages and Cost Savings (Replacement for
AN 5-3) |
an618.pdf |
271K |
|
| Application Note 7-10: Consumer IR Primer/Manual/Software
Outline |
an710.pdf |
197K |
|
 |
| Anomaly |
Contact your local SMSC representative |
| Object Code |
Unlimited royalty-free distribution
rights when offered with SMSC controller |
| Source Code |
Contact your local SMSC representative |
| Using the Adobe Acrobat Reader |
aacrobat.html |
|
|