|
LAN9118
High-Performance 32-Bit Single-Chip 10/100 Non-PCI Ethernet Controller
 Highlights
 | Optimized for the highest-data rate applications such as high-definition video and multi-media applications |
| Efficient architecture with low CPU overhead |
| Easily interfaces to most 32-bit and 16-bit Embedded CPU’s |
| Integrated PHY |
| Supports audio & video streaming over Ethernet: multiple high-definition (HD) MPEG2 streams |
| Pin compatible with other members of LAN9118 Family (LAN9117, LAN9116 and LAN9115) |
Target Applications
| Video distribution systems, multi-room PVR |
| High-end Cable, satellite, and IP set-top boxes |
| Digital video recorders |
| High definition televisions |
| Digital media clients/servers |
| Home gateways |
Key Benefits
| Supports highest performance applications
 | Highest performing non-PCI Ethernet controller in the market |
| 32-bit interface with fast bus cycle times |
| Burst-mode read support |
|
| Eliminates dropped packets
| Internal buffer memory can store over 200 packets
|
| Supports automatic or host-triggered PAUSE and back-pressure flow control |
|
| Minimizes CPU overhead
| Supports Slave-DMA |
| Interrupt Pin with Programmable Hold-off timer |
|
| Reduces system cost and increases design flexibility
| SRAM-like interface easily interfaces to most
Embedded CPU’s or SoC’s |
| Low-cost, low-pin count non-PCI interface for embedded designs
|
|
| Reduced-Power Modes
| Numerous power management modes |
| Wake on LAN* |
| Magic packet wakeup* |
| Wakeup indicator event signal |
| Link Status Change
|
|
| Single chip Ethernet controller
| Fully compliant with IEEE 802.3/802.3u standards |
| Integrated Ethernet MAC and PHY |
| 10BASE-T and 100BASE-TX support |
| Full- and Half-duplex support |
| Full-duplex flow control |
| Backpressure for half-duplex flow control |
| Preamble generation and removal |
| Automatic 32-bit CRC generation and checking |
| Automatic payload padding and pad removal |
| Loop-back modes
|
|
| Flexible address filtering modes
| One 48-bit perfect address |
| 64 hash-filtered multicast addresses |
| Pass all multicast |
| Promiscuous mode |
| Inverse filtering |
| Pass all incoming with status report |
| Disable reception of broadcast packets
|
|
| Integrated Ethernet PHY
| Auto-negotiation |
| Automatic polarity detection and correction
|
|
| High-Performance host bus interface
| Simple, SRAM-like interface |
| 32/16-bit data bus |
| Large, 16Kbyte FIFO memory that can be allocated to
RX or TX functions |
| One configurable host interrupt
|
|
| Miscellaneous features
| Low profile 100-pin, TQFP lead-free RoHS Compliant
package |
| Integral 1.8V regulator |
| General Purpose Timer |
| Support for optional EEPROM |
| Support for 3 status LEDs multiplexed with
Programmable GPIO signals
|
|
| 3.3V Power Supply with 5V tolerant I/O |
| 0° to 70°C |
*Third-party brands and names are the property of their respective owners.
General Description
The LAN9118 is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9118 has been specifically architected to provide the highest performance possible for any given architecture. The LAN9118 is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant.
The LAN9118 includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit and 32-bit microprocessors and microcontrollers. LAN9118 includes large transmit and receive data FIFOs with a high-speed host bus interface to accommodate high bandwidth, high latency applications. In addition, the LAN9118 memory buffer architecture allows the most efficient use of memory resources by optimizing packet granularity.
ORDERING INFORMATION
Order Number(s):
LAN9118-MT for 100 Pin, TQFP Lead-Free RoHS Compliant Package with E3 Finish (Matte Tin) |
 LAN9118 Data Sheet, Application Notes,
Drivers and Design Tools
| Description | File Name | File Size | Date |
 |
| LAN9118 Data Brief | 9118db.pdf | 118K | 5/31/07 |
| LAN9118 Data Sheet | 9118.pdf | 1494K | 5/31/07 |
|
| Reference Design Files |
| LAN9118 Reference Design Schematic | 9118sch.pdf | 47K | 7/09/07 |
| LAN9118 Reference Design Bill of Materials | 9118bom.pdf | 23K | 6/20/07 |
|
| LANCheck™ Online Review | | | |
| The LAN9118 is supported by SMSC's LANCheck Online Review, a personalized, value-added service exclusive to SMSC and available at no charge to customers who have selected our Ethernet offerings for their application design-in. LANCheck will support your design process by providing guidance through the complete design cycle – from initial schematic design to PCB design. The following documents are available to assist you with your design: |
| LAN9118 Schematic Checklist |
| LAN9118 Component Placement Checklist |
| LAN9118 Routing Checklist |
|
| Application Notes | | | |
| Application Note 8-13: Suggested Magnetics | an813.pdf | 253K | 2/6/08 |
| Application Note 12-5: Designing with the LAN9118 - Getting Started | an125.pdf | 942K | 12/10/04 |
| Application Note 12-12: LAN9118 Family Programmers Reference Guide | an1212.pdf | 590K | 3/27/06 |
| Application Note 12-19: Designing for LAN9118 Family Footprint Compatibility | an1219.pdf | 207K | 6/6/05 |
| Application Note 14-10: Migrating from the LAN9118 to the LAN9218I | an1410.pdf | 178K | 4/12/06 |
|
| Drivers | | | |
| A LAN9118 driver (smc911x.c) can be found in Linux kernel distributions version 2.6. |
|
| Source Code | | | |
SRC-118-EBOOT-XSCALE
LAN9118 Family/LAN9215/LAN9218I/LAN9211 eBoot Driver for Xscale (PXA270) processor | Download | E-Services Account Required |
SRC-118-LINUX-SH3
LAN9118 Family/LAN9215/LAN9218I Linux driver source code
for SH3 processor | Download | E-Services Account Required |
SRC-118-LINUX-SIMPLE
Simplified LAN9118 Family Linux driver source code for porting
to embedded systems, referenced by Application Note 12.12 | Download | E-Services Account Required |
SRC-118-LINUX-XSCALE
LAN9118 Family/LAN9215/LAN9218I/LAN9211 Linux driver
source code for Xscale (PXA270) processor | Download | E-Services Account Required |
SRC-118-PSEUDO
Generic driver/pseudo-code for the LAN9118 Family/
LAN9215/LAN9218I | Download | E-Services Account Required |
SRC-118-UBOOT-ARM
LAN9118 Family/LAN9215/LAN9218I uboot driver source code for ARM processor | Download | E-Services Account Required |
SRC-118-VXWORKS_55-SH3
LAN9118 Family/LAN9215/LAN9218I/LAN9211 VxWorks Driver for SH3 processor | Download | E-Services Account Required |
SRC-118-WINCE42-SH3
LAN9118 Family WinCE4.2 driver source code for SH3 processor | Download | E-Services Account Required |
SRC-118-WINCE_50&60-XSCALE
LAN9118 Family/LAN9215/LAN9218I/LAN9211 Windows CE 5.0 and 6.0 driver source code for Xscale (PXA270) processor | Download | E-Services Account Required |
|
Contact your SMSC Sales Representative for more information on the LAN9118
|
