LAN91C96i
Non-PCI Single-Chip Full Duplex Ethernet Controller
Features
 |
Non-PCI Single-Chip Ethernet Controller |
 |
Fully Supports Full Duplex Switched Ethernet |
 |
Supports Enhanced Transmit Queue Management |
 |
6K Bytes of On-Chip RAM |
 |
Supports IEEE 802.3 (ANSI 8802-3) Ethernet
Standards |
 |
Automatic Detection of TX/RX Polarity Reversal |
 |
Enhanced Power Management Features |
 |
Supports "Magic Packet" Power Management
Technology |
 |
Hardware Memory Management Unit |
 |
Optional Configuration via Serial EEPROM
Interface (Jumperless) |
 |
Supports Single 5V or 3.3V VCC Design |
 |
Industrial Temperature Range of -40° to
85° C |
 |
Supports Mixed Voltage External PHY Designs |
 |
Low Power CMOS Design |
 |
100 Pin QFP and TQFP Lead-Free RoHS Compliant Packages (1.0mm Body Thickness) |
 |
Pin Compatible with the LAN91C92 and LAN91C94 |
Bus Interface
 |
Direct Interface to Local Bus with No Wait
States |
 |
Flexible Bus Interface |
 |
16 Bit Data and Control Paths |
 |
Fast Access Time |
 |
Pipelined Data Path |
 |
Handles Block Word Transfers for Any Alignment |
 |
High Performance Chained ("Back-to-Back")
Transmit and Receive |
 |
Pin Compatible with the LAN91C92 and the
LAN91C94 in Local Bus Mode |
 |
Dynamic Memory Allocation Between Transmit
and Receive |
 |
Flat Memory Structure for Low CPU Overhead |
 |
Buffered Architecture, Insensitive to Bus
Latencies (No Overruns/Underruns) |
 |
Supports Boot PROM for Diskless Local Bus
Applications |
Network Interface
 |
Integrated 10BASE-T Transceiver Functions:
 |
Driver and Receiver |
 |
Link Integrity Test |
 |
Receive Polarity Detection and Correction |
|
 |
Integrated AUI Interface |
 |
10 Mb/s Manchester Encoding/Decoding and
Clock Recovery |
 |
Automatic Retransmission, Bad Packet Rejection,
and Transmit Padding |
 |
External and Internal Loopback Modes |
 |
Four Direct Driven LED Outputs for Status/Diagnostics |
Software Drivers
 |
LAN9000 Drivers for Major Network Operating
Systems Utilizing Local Bus Interface |
 |
Software Drivers Compatible with the LAN91C92,
LAN91C94, LAN91C100FD (100 Mbps), and LAN91C110 (100 Mb/s)
Controllers in Local Bus Mode |
 |
Software Drivers Utilize Full Capability
of 32 Bit Microprocessor |
Ordering Information
Order Number(s):
LAN91C96I-MU for 100 Pin, TQFP Lead-Free RoHS Compliant Package
LAN91C96I-MS for 100 Pin, QFP Lead-Free RoHS Compliant Package |
LAN91C96I
Data Sheet, Application Notes,
Drivers and Design Tools
| Description |
File Name |
File Size |
Date |
 |
| LAN91C96I Data Brief |
91c96idb.pdf |
101K |
10/23/08 |
| LAN91C96I Data Sheet |
91c96i.pdf |
699K |
10/23/08 |
 |
| Evaluation Boards |
|
|
|
EVB9000-6
EVB9000-6p |
|
|
|
 |
| Reference Design
Files |
|
|
|
| LAN9000 Diagnostic/Setup Utilities |
utility.zip |
302K |
6/15/07 |
| LAN91C96I +5V Operation Reference Design,
Evaluation Schematic |
91c96i5vsch.pdf |
78K |
3/5/04 |
| LAN91C96I +5V Operation Reference Design,
Bill of Materials |
91c96i5vbom.pdf |
93K |
9/10/03 |
| LAN91C96I +3.3V Operation Reference Design,
Evaluation Schematic |
91c96i3vsch.pdf |
77K |
3/5/04 |
| LAN91C96I +3.3V Operation Reference Design,
Bill of Materials |
91c96i3vbom.pdf |
96K |
9/10/03 |
 |
| LANCheck® Online Review* | | | |
| The LAN91C96I is supported by SMSC's LANCheck Online Review, a personalized, value-added service exclusive to SMSC and available at no charge to customers who have selected our Ethernet offerings for their application design-in. LANCheck will support your design process by providing guidance through the complete design cycle - from initial schematic design to PCB design. The following documents are available to assist you with your design: |
| LAN91C96 3.3V |
| Schematic Checklist |
100 Pin QFP |
100 Pin TQFP |
| LAN91C96 5V |
| Schematic Checklist |
100 Pin QFP |
100 Pin TQFP |
*The LANCheck Online Review is subject to SMSC's Program Terms and Conditions and requires an E-services account for access. |
 |
| Application Notes |
|
|
|
| Application Note 6-1: ETX Ethernet Debug Software User Guide |
an61.pdf |
222K |
7/17/07 |
| Application Note 7-7: Migrating LAN91C94 Designs
to the LAN91C96 |
an77.pdf |
190K |
6/9/08 |
| Application Note 8-9: LAN91C96 Motorola 68000
Bus Mode |
an89.pdf |
264K |
11/10/08 |
| Application Note 8-13: Suggested Magnetics |
an813.pdf |
253K |
8/4/08 |
| Application Note 8-15: Using the "Remove Frame
from Top of TX FIFO" MMU Command in the LAN91C96/LAN91C96I
Ethernet Controllers |
an815.pdf |
192K |
2/2/00 |
| Application Note 9-4: Migrating from a 10
Mbps Ethernet Controller to the SMSC LAN91C111 |
an94.pdf |
264K |
1/20/09 |
| Application Note 9-8: I/O-Based (Non-DMA)
Non-PCI Embedded Ethernet Solutions |
an98.pdf |
173K |
12/2/08 |
| Application Note 9-11: Understanding the Chip
ID and Revision Registers |
an911.pdf |
111K |
8/6/01 |
| Application Note 10-7: Parallel Crystal Circuit
Input Voltage Control |
an107.pdf |
135K |
11/11/03 |
 |
| Drivers |
|
|
|
| Linux Drivers |
linux9.tar.gz
smc9_pcm.tar |
16K
120K |
8/20/98
8/20/98 |
Microsoft Drivers
NDIS 2 for Windows for Workgroups
& OS/2
NDIS 3/NDIS 4 for Windows 95, Windows
NT 4.0, Windows 98, & Windows 2000
x86 NDIS 4 for Windows CE 2.1x
StrongARM NDIS4 for Windows CE 3.0
x86 Windows CE .NET Driver |
ndis2.zip
ndis3-4.zip
ce9000.zip
cd3v101_011201.zip
91c96cenet.zip |
121K
443K
63K
101K
24K |
8/20/98
6/30/00
10/27/99
1/12/01
10/18/02 |
Novell Drivers
DOS-ODI & OS/2, Server |
novell.zip |
501K |
5/26/00 |
| SCO Drivers |
s9192.tar |
210K |
8/20/98 |
| FreeBSD Unix Drivers |
smc9k.tar.gz |
17K |
8/20/98 |
 |
| Source Code |
|
|
|
| Download SRC-9000-CE |
SRC-9000-CE |
| Download SRC-9000-CENET86 |
SRC-9000-CENET86 |
| Download SRC-9000-CENETSA |
SRC-9000-CENETSA |
| Download SRC-9000-ODI |
SRC-9000-ODI |
| Download SRC-9000 |
SRC-9000 |
 |
| Other Information |
|
|
|
| Object Code |
Unlimited royalty-free distribution
rights when offered with SMSC controller |
| Anomaly |
Contact your local SMSC representative |
| Using the Adobe® Acrobat® Reader |
aacrobat.html |
|
|
 |
Links to Other
Ethernet-Related Sites
Note: These links are provided under the terms and conditions of SMSC's
Web Site Use Agreement. Please refer to Legal
Information.
http://msdn.microsoft.com/en-us/embedded/default.aspx -
Windows NT Embedded includes native LAN9000 support
http://www.compulab.co.il -
Windows CE x86 Driver, VxWorks x86 Driver and Linux x86 Driver for the
LAN91C96 are provided with the CompuLab 486CORE Embedded PC
http://www.navic.tv/ -
Windows CE StrongARM Driver, Windows CE MIPS Driver and VxWorks MIPS
Driver for the LAN91C96 are provided with the Navic HyperEdge development
stations
http://www.crynwr.com/smc91c94.html/ -
Packet driver for LAN91C94/LAN91C96 is provided by Crynwr Software
http://www.windriver.com -
VxWorks driver support for LAN9000 controllers is provided by Wind River
Systems
http://www.qnx.com -
QNX driver support for LAN9000 controllers is provided by QNX (driver
devn-smc9000)
http://www.elisaresearch.com -
Boot ROM support for LAN9000 controllers is available from Elisa Research
http://www.bootix.com -
Boot ROM support for LAN9000 controllers is available from Bootix Technology
http://www.cmx.com/tcpip.htm -
CMX Systems TCP/IP Stacks for LAN91C96
http://www.kadak.com/tcp_ip/tcpip.htm - Kadak Products TCP/IP Stacks for LAN91C96
|
Although the information in this document has been checked and is believed to be accurate, no responsibility is assumed for
inaccuracies. SMSC reserves the right to make changes to product descriptions and specifications at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order. Products may contain design defects or errors known as anomalies which may cause a product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC and the SMSC logo are registered trademarks of Standard Microsystems Corporation ("SMSC"). Other names mentioned may be trademarks of their respective holders. All claims made herein speak as of the date of this material. The company does not undertake to update such statements. (11/08)
|